Planning of dismantling procedures - Voreppe, France

Posted at 06-09-2018

Project: Voreppe Pulp Mill Dismantling

Detailed planning of dismantling process is the only right way to get the successful completion of the project. By flotation cells, which are a part of deinking stage, this planning process is especially important.
Flotation cells, produced by Voith, in the deinking process are the most important part, in which the printing ink and stickies are separated from the pulp by using the air. This part of machine is fragile, and must be cut and lifted very careful to avoid the distortion of cells.
In former Voreppe Pulp Mill, two deinking flotation cells were taking parts in the process Ė they are 4,5 metres wide and almost 26 metres long!
Thank to our engineersí full engagement in technical planning on the factory Site in Voreppe, Margiz know very well how to do this task in the best way.

Planning of dismantling procedures - Voreppe, France Planning of dismantling procedures - Voreppe, France Planning of dismantling procedures - Voreppe, France

News and galleries related to this project

We're getting close to the end of the job  |  posted at 01-08-2019  |  NEWS
Works at project with full mobilization  |  posted at 10-05-2019  |  NEWS
Continuation of works in Voreppe, France  |  posted at 13-04-2019  |  NEWS
Safety first - continuation of works in Voreppe  |  posted at 15-03-2019  |  NEWS
Oversized transports from Voreppe, France  |  posted at 18-12-2018  |  NEWS
Dismantling of bleaching towers in Voreppe, France  |  posted at 24-10-2018  |  NEWS
Lifting of oversized elements - flotation cells - Voreppe, France  |  posted at 10-09-2018  |  NEWS
Beginning of flotation cells removal in Voreppe  |  posted at 07-09-2018  |  NEWS
A look over the heavy-lifting actions - Voreppe, France  |  posted at 05-09-2018  |  NEWS
Project in France reaching 25%  |  posted at 14-08-2018  |  NEWS
Margiz machines in action - Voreppe, France  |  posted at 25-07-2018  |  NEWS
Beginning of dismantling in Voreppe, France  |  posted at 22-07-2018  |  NEWS
Matchmarking works in Voreppe has oficially started!  |  posted at 25-06-2018  |  NEWS

New project - PM2 disassembly in Germany

New project - PM2 disassembly in Germany

Posted at 28-07-2022


Celebration time! Margiz have been contracted for another paper machine disassembly in Germany.
We are glad to share with you the news, that we will begin our activities near Köln the next week.
Read more

ISO 9001:2015 and 14001:2015 certificates enlarged for another 3 years

ISO 9001:2015 and 14001:2015 certificates enlarged for another 3 years

Posted at 27-07-2022


We are glad to announce, that on 19th of July we have successfully passed certifying audit for ISO 9001:2015 and 14001:2015.
Great thank you for our administrative and project team, for taking care of our standards and searching of improvement ways.
Our certification is assurance of the ...
Read more

Works on the roof - paper machine disassembly in Berlin

Works on the roof - paper machine disassembly in Berlin

Posted at 15-07-2022


While the works inside the building are mostly finalized, our team in Berlin have moved activities to the outside areas; also on the roof!
As it is to see on the pictures, elements of heat exchanger are disasappearing fast, one by one.
Now we can proceed to cleaning and securing of the roof ...
Read more

About us

Our work

We are a German-Polish Company, our main objective is innovative dismantling and assembly of equipment and production lines. Matchmarking, dismantling, loading and shipping, of materialand finally re-... Read more

Our team

Our team consists of highly skilled workers: mechanics, electricians, electronic technicians, welders. From dismantling to re-erection, all project phases are handled and carefully documented for our Customer. Read more

Our tools

For every task we provide the best solution! Forklifts, cranes and special lifting equipment, tools for dismantling and overhauling, MARGIZ can provide and handle. Our own specific software used for m.... Read more