Valkeakoski - Transport of Yankee Cylinder

Posted at 06-06-2017

Project: Tervasaari PK 7 dismantling - transfer of paper machine from Finland to Sweden

At the beginning of June, as a main, and one of final part to finish Tervasaari project in Valkeakoski, we moved 160 tons Yankee cylinder over top wall of the factory building.
Moving on special rails, the cylinder was rolled through the open building wall and loaded onto a special over-sized trailer.
Our team gave them best to protect cylinder as well as possible. Layers of oil, paper, plastic foil and special wood-clad protect its surface during 2 weeks transport from Finland to Sweden.
Arrangements lasts for months. It was important regional event because Yankee cylinder as a heart of paper machine was placed in this building more than 30 years ago. That's why on the site were present local news and television.
Here are some photos of dismantling and loading a Yankee cylinder:

Valkeakoski - Transport of Yankee Cylinder Valkeakoski - Transport of Yankee Cylinder Valkeakoski - Transport of Yankee Cylinder Valkeakoski - Transport of Yankee Cylinder Valkeakoski - Transport of Yankee Cylinder Valkeakoski - Transport of Yankee Cylinder Valkeakoski - Transport of Yankee Cylinder Valkeakoski - Transport of Yankee Cylinder Valkeakoski - Transport of Yankee Cylinder

News and galleries related to this project

Yankee Cylinder from Tervsaaari is now installed in Skärblacka  |  posted at 13-12-2017  |  NEWS
Project for BillerudKorsnas has came to an end  |  posted at 16-08-2017  |  NEWS
Transport of Yankee Cylinder - Valkeakoski, Finland  |  posted at 24-07-2017  |  GALLERY
Valkeakoski Project at finish line!  |  posted at 20-06-2017  |  NEWS
Headbox - Valkeakoski  |  posted at 07-06-2017  |  NEWS
Paper machine's drying section in Valkeakoski  |  posted at 09-04-2017  |  NEWS
Valkeakoski Project - Packing of Yankee Cylinder  |  posted at 02-04-2017  |  NEWS
New project in Valkeakoski, Finland  |  posted at 22-02-2017  |  NEWS
Beginning of project in Valkeakoski - first view 12.10.2016  |  posted at 20-10-2016  |  GALLERY


News
New project - PM2 disassembly in Germany

New project - PM2 disassembly in Germany

Posted at 28-07-2022

Project: 

Celebration time! Margiz have been contracted for another paper machine disassembly in Germany.
We are glad to share with you the news, that we will begin our activities near Köln the next week.
Read more

ISO 9001:2015 and 14001:2015 certificates enlarged for another 3 years

ISO 9001:2015 and 14001:2015 certificates enlarged for another 3 years

Posted at 27-07-2022

Project: 

We are glad to announce, that on 19th of July we have successfully passed certifying audit for ISO 9001:2015 and 14001:2015.
Great thank you for our administrative and project team, for taking care of our standards and searching of improvement ways.
Our certification is assurance of the ...
Read more

Works on the roof - paper machine disassembly in Berlin

Works on the roof - paper machine disassembly in Berlin

Posted at 15-07-2022

Project: 

While the works inside the building are mostly finalized, our team in Berlin have moved activities to the outside areas; also on the roof!
As it is to see on the pictures, elements of heat exchanger are disasappearing fast, one by one.
Now we can proceed to cleaning and securing of the roof ...
Read more

About us

Our work


We are a German-Polish Company, our main objective is innovative dismantling and assembly of equipment and production lines. Matchmarking, dismantling, loading and shipping, of materialand finally re-... Read more

Our team


Our team consists of highly skilled workers: mechanics, electricians, electronic technicians, welders. From dismantling to re-erection, all project phases are handled and carefully documented for our Customer. Read more

Our tools


For every task we provide the best solution! Forklifts, cranes and special lifting equipment, tools for dismantling and overhauling, MARGIZ can provide and handle. Our own specific software used for m.... Read more